ASTM A106 Grade B Material Chemical Composition, Physical Properties o ASTM A 106 Grade B

ASTM A106 is the American Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service. ASTM A106 has Three Grades ( Grade A, Grade B, and Grade C).

Here We Shall be going to tell you about the Chemical Composition of ASTM A 106 Grade B and Mechanical / Physical Properties of ASTM A106 Grade B.

Chemical Composition Of ASTM A106 Grade B

Chemical Elements	SUGGESTED VALUE FOR ASTM A 106 Grade B
Carbon          (C)	0.30 %  (Max.)
Manganese  (Mn)	0.29 To 1.06 %
Silicon          (Si)	0.10 % (Min.)
Sulphur         (S)	0.035 % (Max.)
Phosphorus  (P)	0.035 % (Max.)
Chromium  (Cr)	0.40 % (Max.)
Nickel        (Ni)	0.40 % (Max.)
Molybdenum (Mo)	0.15 % (Max.)
Copper      (Cu)	0.40 % (Max.)
Vanadium    (V)	0.08 % (Max.)

Only For You : ASTM A106 Grade A Material Chemical Composition and Physical Properties

Mechanical / Physical Properties of ASTM A 106 Grade B

Mechanical/Physical Properties	SUGGESTED VALUE FOR ASTM A 106 Grade B
Tensile strength	60 000 Psi (415 Mpa) [ Minimum ]
Yield strength	35 000 Psi (240 Mpa) [ Minimum ]
Elongation in 2 in. (50mm), min, % Basic minimum elongation transverse strip tests, and for all small sizes tested in full section	For Longitudinal  =  30 [ Minimum ] For Transverse  =  16.5 [ Minimum ]
When Standard Round 2-in. (50mm) gage length test specimen is used	For Longitudinal  =  22 [ Minimum ] For Transverse  =  12 [ Minimum ]

You May Like : ASTM A106 Grade C Material Chemical Composition and Physical Properties